Variable Stock

The user can set up to 12 different colors that you will be allowed to set a stock allowance to, in the interface (which will be covered in a later section). These colors will appear as the default colors where the user will set up the stock allowance to use. Select the colors by clicking on a color and the pull-down menu arrow will appear to the right of the color. Select it and it will give a number of colors to choose from. The user can do this to get 12 colors that match the standards of designing.

In the Options section you have two sections to setup.

Force Stock Colors – With this turned on, once the user starts up RTM and loads a job, a selection of the default colors will be displayed. Setup the stock allowances to use for each color.

Addition Basic Stock Value – with this turned on, the system will use variable stock and the regular stock allowance when creating a program. Therefore, the Variable stock allowance becomes an additional stock allowance.

With this turned off the variable stock setting becomes the only stock allowance that is used when creating a program.