====== Variable Stock ======
The user can set up to 12 different colors that you will be allowed to set a stock allowance to, in the interface (which will be covered in a later section). These colors will appear as the default colors where the user will set up the stock allowance to use. Select the colors by clicking on a color and the pull-down menu arrow will appear to the right of the color. Select it and it will give a number of colors to choose from. The user can do this to get 12 colors that match the standards of designing.

{{::varstock1.png?nolink|}}

In the Options section you have two sections to setup.

**Force Stock Colors** – With this turned on, once the user starts up RTM and loads a job, a selection of the default colors will be displayed.  Setup the stock allowances to use for each color.

**Addition Basic Stock Value** – with this turned on, the system will use variable stock and the regular stock allowance when creating a program. Therefore, the Variable stock allowance becomes an additional stock allowance.

With this turned off the variable stock setting becomes the only stock allowance that is used when creating a program.

{{::varstock2.png?nolink|}}