====== Operation Status ======
{{::operation_status1.png?nolink|}}\\
Under Operation Status there is a drop down menu that will give the following choices.\\

**Always**\\
Machine all holes when the Distance Range is at 0.000 and 0.000 for that drilling macro operation. \\
**Incline Only**\\
This will only machine holes that start with an incline circle in that drilling macro operation.\\
**Straight Only**\\
This will machine all the holes that do not start with an incline circle in that drilling macro operation.\\
**Deactivate**\\
This will deactivate that operation from your drilling macro.\\