====== Verification Tab ======
{{::configmodverificationtab1.png?nolink|}}\\
Here you can set which programs are checked for violations, every type of program that has a check mark next to it will be checked for violations.\\

{{::configmodverificationtab2.png?nolink|}}
With these boxes checked you can also violation check the output ISO file\\

{{::configmodverificationtab3.png?nolink|}}
Here are the parameters for the collision check, you can have it on or off, or set it to check to the head of the machine or not.\\
**Head Clearance (mm)** – here you will set the desired clearance distance you want between the head of the machine and the part.\\
**Collision Test** – here you can have it check all moves or the rapids moves by themselves, or the feed moves by themselves.\\
**Active Head**- Displays the active Head when simulating.\\
**Decimate Head**-this create a lightweight Head for faster collision detection\\
**Drill Collision Length**-this is an option for a future drill function\\
**Sample Distance (mm)** -here you will set the desired clearance distance you want between the holder and the part\\

{{::configmodverificationtab4.png?nolink|}}\\
Z Security Undercut Protection-this option makes sure that retracts are extended when in an undercut condition\\
.Post Retract Correction\\
Intersect Element-this is the amount to raise the rapid retract above a detected interference while posting multiple files.\\