====== Finish Pass Section ======
**Finish Pass Section**
This option is used to leave a more uniform amount of stock on the side walls for the finishing process. The purpose is to remove the tool deflection which will give a better finish and tool life when creating the finishing program. For example, if a .500-inch width of cut is used and a final side stock of .025 is needed, knowing that the tool will not deflect at a .05 side step, use a .075 side stock and a value of .025 in the Finish Pass Stock.\\
**Finish Entry** – this option will determine the way the tool will enter on the final pass. When Go is selected a second window will be displayed giving more options to complete.\\
{{::2doptionspocket2dfinish1.png?nolink|}}\\
The entry and exit will always be an arc you determine the size and at what angle the arc starts.\\
**Entry Radius** – enter the value for the tool to arc in and out at.\\
 Entry Angle – enter a value of an angle for the tool to start at. 0 degrees is parallel to the side wall and 90 degrees is perpendicular to the side wall. \\