====== Z-Cut Part Program ======

The Z-Cut Part program is made up of 7 sections.\\
1.	Files – give the program a name and select a window if needed.\\
2.	Tool – select tool and give the tool parameters.\\
3.	Reference Tool – letting the system know the previous tool that was used.\\
4.	Check/Update – checking for violation or updating the stock model.\\
5.	Geometry – set upper and lower limits, stocks and step overs.\\
6.	Detailing – the ability to use different media to use to tell the system what to reference to cut the work piece.\\
7.	Entry/Exit Options – gives options on how to enter and exit the tool path.\\
The following explains each section in detail.\\

{{::z-cutpart1.png?nolink|}}