====== Flow Cut Program ======

The Flow Cut program will cut inner corners by using a reference cutter to calculate a program. It will parallel to the corner and work its way from the outside to the inside of the corner. The last pass will be a cut down the center of the corner. The Flow Cut Program consists of 7 sections.\\
1.	Files – give the program a name and select a window if needed.\\
2.	Tool – select tool and give the tool parameters.\\
3.	Check/Update – for checking for violation or updating the stock model.\\
4.	Geometry – set upper and lower limits, stocks and step overs.\\
5.	Detailing – this will give the user a choice on how to detect material.\\
6.	Reference Tool –the user will enter the information of the previous tool\\
7.	Entry/Exit options – setup the way the user wants to enter and exit.\\
The following explains each section in detail.\\
{{::flow_cut_program1.png?nolink |}}