====== Entry/Exit ======
{{::dragcutgeo18.png?nolink|}}\\
The Default button will have additional options and values that can be changed.\\
**Entry Inc** – this value is the distance that the toolpath will rapid to above the start point of the pass before going into feed motion.\\
**Exit Inc** – this is the distance the tool will travel in a feedrate mode when leaving the steel before it goes into a rapid movement.\\

Window Parameters will let the system know how the user wants the tool to make contact with the window used, there are three options.\\
{{::dragcutgeo19.png?nolink|}}\\
**Center** – this will let the system know that the user wants the center of the tool to be on the edge of the window.\\
{{::dragcutgeo20.png?nolink|}}\\
**Inside** – will let the system know if the user wants the tool to stay completely inside the window.\\
{{::dragcutgeo21.png?nolink|}}\\
**Outside** – will let the system know if the user wants the tool to go just to the outside on the window.\\